Product Overview

If you operate older low-clearance greenhouses, you know the problem: small tractors lack the power for deep tilling or straw incorporation, but regular tractors are too tall to fit inside.
This 70HP low-profile tractor solves both problems at once.

Built for Low Greenhouses - No Renovation Required

Standing just 1.1m tall, this tractor fits under 1.2m high tunnel frames and passes through standard greenhouse doors with room to spare. You won't need to tear down existing frames or invest in structural modifications - it works with your current setup from day one.

70HP of Real Working Power

Don't let the size fool you. This machine packs 70 horsepower - enough to handle deep soil tilling, straw incorporation in one pass, and pulling heavy fertigation tanks without straining. You get full-size tractor performance in a compact, greenhouse-friendly package.

Agile in Narrow Spaces, Sure-Footed on Slopes

With an ultra-short 1.35m wheelbase, it turns cleanly in 0.8m wide aisles without nicking bench edges - no more multi-point turns that eat up hours each day.
The 1,860 kg chassis with a double-layer Q345 steel frame and 55:45 weight balance delivers 25% better traction than comparable models, so it climbs wet slopes without spinning out. Deep herringbone front tires add extra grip when you need it most.

Built to Last, Comfortable to Run

We raised the PTO shaft to 43cm ground clearance to clear stumps and ridges, and used a splined connection that handles 300N·m of torque without bending. Many growers go from replacing shafts twice a season to barely thinking about them.

The driving position is optimized for both visibility and space - you get a wide, open view of your work area and enough room to operate comfortably all day, even with the low-profile body.

With 12 forward and 4 reverse gears tuned for real farm work, plus a dedicated crawler gear that runs at 3.5m/min for precision seeding, you'll always have the right speed for the job.

Factory Direct Support

We've been building tractors for 12 years, and every unit goes through 20+ pre-shipment tests with full reports available to you.
It comes backed by a 2-year full machine warranty and 3-year coverage on the engine and chassis, plus customizable parts for your regional conditions.

Product Specifications

Specification	Details
Engine Power	70 HP
Overall Height	1.1 m/1.17m(Different heights for different working conditions)
Wheelbase	1.35 m
Chassis Weight	1,860 kg
Ground Clearance	23 cm
PTO Shaft Height	43 cm
Transmission	12F+4R with Crawler Gear
Crawler Gear Speed	3.5 m/min