If you operate a commercial greenhouse or farm service fleet, standard light-duty tractors often fall short: unexpected breakdowns, slow maneuvering in tight spaces, and rising operating costs all cut into your profits.
Our Commercial 50HP Greenhouse Tractor is purpose-built for non-stop, high-intensity daily work. It is manufactured by Shandong Jiayuan Agricultural Equipment Co., Ltd., backed by 12 years of agricultural machinery manufacturing expertise and full CE certification, and delivers reliable performance for 10+-hour workdays without interruptions.
Optimized for Narrow Greenhouse Spaces
Engineered specifically for tight indoor growing environments, this tractor measures just 1.2 m wide and 1.13 m tall, fitting seamlessly in 1.4 m aisles and under 1.2 m greenhouse ceilings.
With 30 cm of chassis ground clearance, it clears tall crop canopies without scraping leaves or damaging produce. Its ultra-short 1.25 m wheelbase enables a 2.8 m turning radius - 20% tighter than comparable 50HP tractors - allowing full 180° turns in 1.4 m aisles without reversing. For a 100-bed greenhouse, this saves 1.5 hours per day on repositioning.
Commercial-Grade Heavy-Duty Construction
- Reinforced frame: 8-mm-thick steel (2 mm thicker than entry-level models), with less than 2 mm of deflection even when the tractor pulls a 500-kg harvester, preventing crop and vine damage.
- Heavy-duty side plates: 3 mm thick, tested to support 8 straight hours of operation with a 500-kg plow in clay soil without overheating.
- Laidong 4-cylinder diesel engine: delivers stable 50HP output with fuel consumption of just 2.8 L per hour - 0.5 L less than competing engines - for ongoing fuel cost savings.
- Balanced weight distribution: 60/40 front-rear split eliminates front lift on steep slopes, keeping the unit stable and translating full power into tractive effort.
Lower Operating Costs, Maximum Uptime
60 L cast iron fuel tank
Supports 8–10 hours of continuous work on a single fill, eliminating mid-shift refueling stops.
External wet-type air filter
50-hour service life - 2.5x longer than standard dry filters - saving 2 hours per week on filter maintenance.
Low failure rate
Minimizes unplanned downtime, helps you meet field schedules, and lets you take on more contracts to increase revenue.
Versatile for Multiple Farming Applications
Beyond greenhouses, this tractor excels across diverse growing operations:
Vineyards
Ideal for 1.5–1.8 m row spacing. The rear-mounted exhaust (angled 15° downward and 30° away from rows) prevents tendril tangling and keeps fruit clean, meeting EU export standards.
Hilly fields
Handles slopes up to 18%. Wide 910/250-20 rear tires provide 0.3 m² of contact area, preventing slippage even when hauling 700-kg crop bins uphill.
Nurseries
47-cm-tall PTO shaft provides 17 cm of clearance over raised beds to avoid damaging young seedlings. The creeper gear runs at 13 m/min, matching the pace of manual transplanting.
Key Technical Specifications
|
Specification |
Details |
What It Means for You |
|
Overall Dimensions |
Length: 2.55 m; Width: 1.2 m; Height: 1.13 m |
1.2 m width fits 1.5 m narrow rows; 1.13 m height fits under 1.2 m greenhouse ceilings |
|
Wheelbase |
1.25 m |
180° turns in 1.4 m aisles without reversing; rear wheel deviation <15 cm |
|
Chassis Ground Clearance |
30 cm (high-clearance design) |
Clears 95% of field rocks <25 cm; no scraping of irrigation tubes |
|
PTO Shaft Height |
47 cm |
17 cm safety margin for 30-cm-tall raised beds; no bed-edge impacts |
|
Tire Configuration |
Front: 620/190-12; Rear: 910/250-20 |
Rear tires (0.3 m² contact area) prevent sinking in mud |
|
Transmission Type |
12F + 4R fully meshed sleeve shifting |
No gear jamming in dusty conditions; smooth shifting |
|
Creeper Gear Speed |
Minimum 13 m/min |
Matches walking pace for transplanting; no seedling damage from rushed work |
|
PTO Output |
540/720 rpm (dual-speed) |
Compatible with most implements (trimmers, seeders, harvesters) |
|
Hydraulic System |
Strong lift/lower with floating function; 1–2 hydraulic outputs |
Easily lifts 500-kg plows; supports 2 implements at once |
|
Operating Weight |
1400 kg (60% front, 40% rear) |
30% better overall grip on slopes; no wasted power |
|
Engine |
Laidong 4-cylinder diesel |
50HP output; fuel consumption: 2.8 L/h (0.5 L less than similar engines) |
|
Exhaust Port |
Rear-mounted (15° downward, 30° away from rows) |
No grape tendril tangling; no fruit contamination from exhaust |
|
Air Filter |
External wet-type |
Lasts 50 hours; saves 2 hours/week on maintenance |
|
Fuel Tank |
Cast iron (60 L) |
No cracking in -5 °C; impact-resistant; 8–10 hours of work without refueling |
|
Braking System |
Disc brakes |
Stops in 2.5 m from 10 km/h; no slipping in mud |
FAQ
Q: Can this tractor operate in muddy fields?
A: Yes. Wide rear tires distribute weight evenly to prevent sinking. It has been tested to perform reliably with a 300-kg seeder in waterlogged rice paddies.
Q: Does maintenance require special tools?
A: No. Every tractor ships with a complete maintenance kit and step-by-step visual guide for basic upkeep.
Q: What are the benefits of a rear-mounted exhaust?
A: Front exhausts commonly tangle with grape tendrils 2–3 times daily and leave residue on crops. Our rear design eliminates tangling, keeps produce clean, and meets EU standards.
Q: Will this fit in my narrow greenhouse aisles?
A: Yes. Its 1.2 m width fits perfectly in 1.4 m aisles, and it can complete 180° turns without reversing.
Hot Tags: commercial 50hp greenhouse tractor, China commercial 50hp greenhouse tractor manufacturers, suppliers, factory, 50HP Adjustable Track Greenhouse Tractor, 50HP Low Profile Greenhouse Tractor, 50HP Professional Greenhouse Tractor, 50HP Rubber Track Greenhouse Tractor, 50HP Turf Tire Greenhouse Tractor, Compact Narrow 50HP Greenhouse Tractor
