70HP 4WD Orchard Tractor

Tight turns in greenhouses and narrow orchards often waste hours of repositioning time. The 1.35m short wheelbase lets operators pivot smoothly between rows without repeated back-and-forth movement. It works safely in 1.5m row spacing, with no risk of scraping tree trunks or damaging young plants. Many growers cut idle repositioning time by 75% with this design.

Most compact tractors lack the weight for stable hill performance. The GY704D features a reinforced chassis with a 1,860kg operating weight, paired with a compact 2.75m length and 1.2–1.3m width. This balance delivers enough traction to pull a 1.2m harrow up a 20° slope, while still fitting through narrow orchard rows. You do not have to choose between compact size and working power.

Standard 4WD systems often suffer from front wheel spin on steep slopes. The GY704D uses a front-weighted layout to press front tires firmly into the soil, for consistent grip on rough, uneven ground. Growers hauling loads up 18° slopes report zero backward sliding with this design.

Most tractors struggle with either low-hanging orchard branches or rocky, uneven soil. The GY704D stands only 1.17m tall, so it glides under fruit tree branches without damaging blossoms. It also offers 30cm of chassis ground clearance, to roll over rocks and uneven ground without getting stuck.

Rocks and mud frequently damage standard PTO shafts and cause costly downtime. This tractor's PTO shaft sits 50cm off the ground - 10cm higher than the industry standard. The elevated design protects it from field debris, and many operators report zero PTO damage after years of use in muddy conditions.

Different farm tasks require different travel speeds. The GY704D has 12 forward and 4 reverse gears with smooth shifting, plus a dedicated crawler gear with a minimum speed of 3.5 meters per minute. The ultra-slow crawler setting is ideal for precision seeding and dense orchard plowing.